No, for matte and satin finishes, use LACUNA® Shampoo Matte PPF to maintain the non-glossy texture without adding unwanted shine.

1. Shake the bottle well.
2. Spray directly onto the affected area.
3. Wipe clean with a microfiber towel in a circular motion.

Use when water beading effect reduces, especially before a road trip or during seasonal changes.

1. Spray onto a sponge pad.
2. Apply evenly across the surface.
3. Let it sit for a few minutes before wiping down.

Yes, but for matte and satin finishes, use LACUNA® Perfect Remover Matte PPF to prevent unwanted gloss effects.

Apply LACUNA® PPF Seal or PPF Promoter to refresh the hydrophobic layer.

1. Using harsh chemicals – Stick to pH-neutral products.
2. Applying wax or ceramic coatings not designed for PPF – Use PPF-specific treatments only.
3. Scrubbing with rough sponges – Always use microfiber towels.
4. Directing high-pressure washers at edges – This can cause lifting over time.
5. Skipping routine cleaning – Dirt buildup can cause staining and etching on the film.

Spray & Shine is a quick detailing spray that revitalizes, enhances depth, and protects PPF with a single application.

1. Spray 9 times onto a microfiber cloth.
2. Gently apply the product across the PPF surface.
3. Use the dry side of the cloth to buff the surface.

Wash at least once every two weeks to prevent dirt buildup and contamination. If driving in high-pollution or dusty areas, increase frequency to weekly washing.

Apply every 3-6 months for optimal protection and shine retention.

Avoid washing the car for at least 7 days after PPF installation. This allows the adhesive to cure properly and prevents water from interfering with adhesion.

This is a waterless cleaning spray that removes:

• Fingerprints
• Dust & dirt
• Bug splatter & bird droppings
• Oil and grease stains

Avoid brush-based automatic washes, as they can introduce micro-scratches. Touchless car washes are safer, but hand washing with PPF-safe products is always recommended.

• Machine wash at 40°C (104°F).
• Do not use fabric softeners or bleach.
• Air dry or tumble dry on low heat.