1. Spray onto a sponge pad.
2. Apply evenly across the surface.
3. Let it sit for a few minutes before wiping down.

Apply LACUNA® PPF Seal or PPF Promoter to refresh the hydrophobic layer.

LACUNA® PPF Seal enhances the hydrophobic effect, making water bead off the surface while providing a glossy finish that lasts up to 12 months.

Microfiber towels prevent scratches, streaks, and lint buildup, ensuring a smooth and even application of aftercare products.

Yes, but avoid directing high-pressure water at the edges of the film to prevent lifting. Keep the pressure below 1,200 PSI and maintain a distance of at least 12 inches from the surface.

Avoid washing the car for at least 7 days after PPF installation. This allows the adhesive to cure properly and prevents water from interfering with adhesion.

Spray & Shine is a quick detailing spray that revitalizes, enhances depth, and protects PPF with a single application.

Proper aftercare extends the lifespan of your PPF, maintaining its self-healing properties, hydrophobic effect, and UV resistance. Regular cleaning and protection prevent contamination buildup, ensuring the film performs optimally for years.

• Use LACUNA® PPF Perfect Remover for quick clean-ups.
• Apply LACUNA® PPF Seal before winter for extra protection.
• Rinse off road salt and de-icing chemicals as soon as possible.

Avoid brush-based automatic washes, as they can introduce micro-scratches. Touchless car washes are safer, but hand washing with PPF-safe products is always recommended.

Use when water beading effect reduces, especially before a road trip or during seasonal changes.

High-quality PPF resists yellowing, but neglecting aftercare or using harsh chemicals can lead to discoloration.

Yes, but for matte and satin finishes, use LACUNA® Perfect Remover Matte PPF to prevent unwanted gloss effects.

1. Using harsh chemicals – Stick to pH-neutral products.
2. Applying wax or ceramic coatings not designed for PPF – Use PPF-specific treatments only.
3. Scrubbing with rough sponges – Always use microfiber towels.
4. Directing high-pressure washers at edges – This can cause lifting over time.
5. Skipping routine cleaning – Dirt buildup can cause staining and etching on the film.

1. Spray onto the PPF surface.
2. Wipe dry with a microfiber cloth.