• Machine wash at 40°C (104°F).
• Do not use fabric softeners or bleach.
• Air dry or tumble dry on low heat.

Wash at least once every two weeks to prevent dirt buildup and contamination. If driving in high-pollution or dusty areas, increase frequency to weekly washing.

Avoid washing the car for at least 7 days after PPF installation. This allows the adhesive to cure properly and prevents water from interfering with adhesion.

Apply every 3-6 months for optimal protection and shine retention.

1. Shake the bottle well.
2. Spray directly onto the affected area.
3. Wipe clean with a microfiber towel in a circular motion.

Proper aftercare extends the lifespan of your PPF, maintaining its self-healing properties, hydrophobic effect, and UV resistance. Regular cleaning and protection prevent contamination buildup, ensuring the film performs optimally for years.

1. Spray onto a sponge pad.
2. Apply evenly across the surface.
3. Let it sit for a few minutes before wiping down.

Use when water beading effect reduces, especially before a road trip or during seasonal changes.

Yes, but for matte and satin finishes, use LACUNA® Perfect Remover Matte PPF to prevent unwanted gloss effects.

Use it after washing or before events/shows to instantly refresh the look of your PPF.

1. Spray 9 times onto a microfiber cloth.
2. Gently apply the product across the PPF surface.
3. Use the dry side of the cloth to buff the surface.

Microfiber towels prevent scratches, streaks, and lint buildup, ensuring a smooth and even application of aftercare products.

No, for matte and satin finishes, use LACUNA® Shampoo Matte PPF to maintain the non-glossy texture without adding unwanted shine.

Avoid brush-based automatic washes, as they can introduce micro-scratches. Touchless car washes are safer, but hand washing with PPF-safe products is always recommended.

1. Using harsh chemicals – Stick to pH-neutral products.
2. Applying wax or ceramic coatings not designed for PPF – Use PPF-specific treatments only.
3. Scrubbing with rough sponges – Always use microfiber towels.
4. Directing high-pressure washers at edges – This can cause lifting over time.
5. Skipping routine cleaning – Dirt buildup can cause staining and etching on the film.