1. Spray onto the PPF surface.
2. Wipe dry with a microfiber cloth.

Apply every 3-6 months for optimal protection and shine retention.

Microfiber towels prevent scratches, streaks, and lint buildup, ensuring a smooth and even application of aftercare products.

Wash at least once every two weeks to prevent dirt buildup and contamination. If driving in high-pollution or dusty areas, increase frequency to weekly washing.

No, for matte and satin finishes, use LACUNA® Shampoo Matte PPF to maintain the non-glossy texture without adding unwanted shine.

Spray & Shine is a quick detailing spray that revitalizes, enhances depth, and protects PPF with a single application.

Apply LACUNA® PPF Seal or PPF Promoter to refresh the hydrophobic layer.

Use when water beading effect reduces, especially before a road trip or during seasonal changes.

• Machine wash at 40°C (104°F).
• Do not use fabric softeners or bleach.
• Air dry or tumble dry on low heat.

1. Using harsh chemicals – Stick to pH-neutral products.
2. Applying wax or ceramic coatings not designed for PPF – Use PPF-specific treatments only.
3. Scrubbing with rough sponges – Always use microfiber towels.
4. Directing high-pressure washers at edges – This can cause lifting over time.
5. Skipping routine cleaning – Dirt buildup can cause staining and etching on the film.

Avoid brush-based automatic washes, as they can introduce micro-scratches. Touchless car washes are safer, but hand washing with PPF-safe products is always recommended.

LACUNA® PPF Shampoo is pH-neutral and formulated with fruit extracts, providing deep cleaning without degrading the film’s hydrophobic properties. Unlike standard shampoos, it preserves the film’s self-healing function.

LACUNA® PPF Seal enhances the hydrophobic effect, making water bead off the surface while providing a glossy finish that lasts up to 12 months.

This is a waterless cleaning spray that removes:

• Fingerprints
• Dust & dirt
• Bug splatter & bird droppings
• Oil and grease stains

Yes, but avoid directing high-pressure water at the edges of the film to prevent lifting. Keep the pressure below 1,200 PSI and maintain a distance of at least 12 inches from the surface.